Enhancing Your System - Sharp MUSIC SYSTEM DK-A1 Operation Manual

Enhancing your system

The connection cord is not included. Purchase a commercially
available cord as shown below.
VCR, DVD, etc.
To the line output jacks
White Red
RCA cord
(not supplied)
Auto power on function:
When you press any of the following buttons, the unit turns on.
AUX button (main unit): The unit turns on and the AUX function is
activated.
/ button (main unit and remote control): The unit turns on and
playback of the last function starts (iPod, TUNER, AUX).
Listening to the playback sounds from VCR,
DVD, etc.
1
Use a connection cord to connect the VCR, DVD etc. to the
AUX IN jacks.
White
When using video equipment, connect the audio output to this
unit and the video output to a television.
Red 2
Press the ON/STAND-BY button to turn the power on.
3
Press the AUX button on main unit once or press the
FUNCTION button on remote control repeatedly to select
AUX.
4
Play the connected equipment.
Note:
To prevent noise interference, place the unit away from the television.
Headphones
Before plugging in or unplugging the headphones, reduce the
volume.
Be sure your headphones have a 1/8" (3.5 mm) diameter plug and
impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
Plugging in the
automatically. Adjust the volume using the VOL (+ or –) control.
During alarm activation, sound will be output to the speaker even
if headphones is plugged in.
headphones disconnects the
DK-A1
DK-A1BK
speakers
21