Saxby Lighting 78959 Instruction Manual

Fitting Units
Locate the product in the track with the connections in the slot.
Slide the tab down, and rotate the product 90º to engage the connections in the track.
Allow the tab to slide back up and ensure that it is located correctly in the track slot.
Replace fuse or circuit breaker and switch on. Your light is now ready for use.
Technical data
Supply
220-240 V~, 50 Hz
Voltage:
Bulb
78959 / 78960 / 78961--10W LED module (SMD), 4000K
Type:
94061/ 94062 / 94063 --10W LED module (SMD), 3000K
This product contains a light source of energy efficiency class E.
Non-replaceable light source
Conformity with all relevant UKCA Directive requirements.
Conformity with all relevant EC Directive requirements.
This product is Class 1, must be connected to earth.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or local store for recycling advice.
This product is suitable for dimming.
0,5m
Minimum distance from lighted objects (0.5 metres)
Care and Safety
• We recommend cleaning with a soft dry cloth. Do not use
solvents or abrasive cleaners as these could damage the
finish.
For further information, please visit https://www.lighting-info.co.uk/78959
V4 06/06/2022
UK Manufacturer: BH17 7BY
EU Manufacturer: Brilliant AG,
Brilliantstrasse 1, D-27442 Gnarrenburg
Non-replaceable control gear
• Always disconnect the product from mains at least 10 minutes
allowing to cool down before any maintenance or adjustment.
• For your safety, always switch off the power supply before cleaning.
Instruction manual
Pacto Track
78959, 78960, 78961, 94061, 94062, 94063
www.saxbylighting.com