Saxby Lighting Bianco LED CCT PIR Instruction Manual

Wiring

Having correctly identified the wiring from your existing light fitting, pull the wire through the hole and connect to the
connection block inside the product in the following way:
SUPPLY
LIVE
AL

Technical data

Supply Bulb
220-240 V~, 50 Hz
Voltage: Type:
Replaceable (LED only) light
source by a professional
Conformity with all relevant UKCA Directive requirements.
Conformity with all relevant EC Directive requirements.
The power supply is Double Insulated and does not require connection to an Earth circuit.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or local store for recycling advice.
This product is rated at IP54.
54
IP
This product is rated at IK08.
08
IK

Care and Safety

We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the finish.
For your safety, always switch off the power supply before cleaning.
This LED Module is protected by a shade. This part must be replaced immediately should the shade
become cracked or damaged. This fitting must not be used without the shade in place.
Replace cracked shade
For further information, please visit https://www.lighting-info.co.uk/75931
V6 31/07/2023
UK Manufacturer: BH17 7BY
EU Manufacturer: Brilliant AG,
Brilliantstrasse 1, D-27442 Gnarrenburg
LIGHT FITTING
Check that...
)
• You have correctly identified the wires.
• The connections are tight.
• No loose strands have been left out of
BL )
the connection block.
7.5W LED module (SMD), CCT 3000/4000/6000K.
This product contains a light source of energy efficiency class D.
Replaceable control gear by a
professional
Instruction manual
Bianco LED CCT PIR
75931
www.saxbylighting.com