Advertisement
Table of Contents
Wiring
Having correctly identified the wiring from your existing light fitting, connect to the approved IP67 (or highter rated)
terminal block in the following way. (recommended terminal block ref. 61515)
Check that...
• You have correctly identified the wires.
• The connections are tight.
• No loose strands have been left out of the terminals.
Care and Safety
• We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage
the finish.
• Always disconnect the product from mains at least 10 minutes allowing to cool down before any maintenance or
adjustment.
This LED's are protected by a plastic lens. The lens part must be replaced immediately should it
become cracked or damaged. This fitting must not be used without the plastic lens in place.
WWW.saxbylighting.com
Instruction leaflet
Ground Deck / Ground light
78646, 78647
Iss .4 08/11/2018
Saxby lighting. BH23 3PE
Advertisement
Table of Contents
Related Manuals for Saxby Lighting 78646
Summary of Contents for Saxby Lighting 78646
- Page 1 This LED's are protected by a plastic lens. The lens part must be replaced immediately should it become cracked or damaged. This fitting must not be used without the plastic lens in place. Iss .4 08/11/2018 WWW.saxbylighting.com Saxby lighting. BH23 3PE...
- Page 2 Technical data 1.5m LED head unit Supply 240 V~, 50 Hz Voltage: LED (1.3W) 4000K (78646) Bulb Type: LED head unit LED (1.3W) 3000K (78647) 1.5m Supplied housing The light source of this luminaire is not replaceable; when the light source reaches its end of life Deck cut out size: the whole luminaire shall be replaced.
Need help?
Do you have a question about the 78646 and is the answer not in the manual?
Questions and answers