Advanced Features; Camera Recording Manual Focus - Sharp ViewCam VL-WD255U Operation Manual

Advanced Features

Advanced Features
Camera Recording
Camera Recording
Manual Focus
Auto Focus may not be able to focus on the
subject in the situations shown below. In such
situations, set the camcorder to Manual Focus
mode and focus manually.
Subject is too dark.
Fast-moving subject.
Subject has horizontal stripes.
Light reflects off the subject.
Subject has fine, repeated
patterns.
Fast-speed shutter being used
under fluorescent lighting.
47
Lack of contrast, e.g. snow
scene.
Background is too bright.
Subject is being shot through a
dirty or wet window.
Two subjects at different distances
overlap in the same scene.
Subjects at different distances
appear in the center of the scene
at the same time.
1
Set the camcorder to TAPE-CAMERA or
CARD-CAMERA mode.
2
Press the AUTO ON/OFF button to
select Manual mode.
3
Press the MENU/DISPLAY button until
the menu screen appears.
4
Select T, then press r on the
Operation button. Select "MAN. FOCUS"
(1), then press r (2).
MANUAL SE T
MAN. FOCUS
SHU T. SP E ED
E XPOSURE
P I C. E F F E C T
SCE NE MENU
F ADE
QK. RE TURN
D I S
5
Press e to display the focus setting
screen.
MANUAL
F OCUS
F AR
NE AR
6
Adjust the Power Zoom
control to frame the
subject as you desire.
AUTO
MANUAL
1 2 bit
SP
S E T [ BUT TON]