Tape Playback; To Stop Playback - Sharp ViewCam VL-WD255U Operation Manual

Quick Operation Guide
Easy Camera Recording on
Tape
1
Make sure that a cassette is inserted.
2
Remove the lens cap, and lift up the
viewfinder.
3
Set the Media Selection
switch to TAPE.
4
Hold down the Lock button
and set the Power switch to
CAMERA.
5
Press the REC START/STOP button to
begin recording.
Zooming
Push the Power Zoom control to T (1)
(telephoto) or W (2) (wide angle) side.
Power Zoom
control
vii

Tape Playback

1
90
Lock button
2
3
RE C
4
5
6

To stop playback

Press d.
Press the LCD monitor OPEN release
button (1), and open the LCD monitor
to a 90° angle to the camcorder body
(2).
Adjust the LCD monitor to an angle that
allows easy viewing on the on-screen
picture.
Set the Media Selection
switch to TAPE.
Hold down the Lock button
and set the Power switch to
VCR.
Press e (or r) on the Operation
button to rewind (or fast forward) the
tape to the desired point.
Press y to begin playback.
LCD monitor OPEN
release button
Lock button
AUDIO1 2 +
AUDIO1 2 +