PROAIM CINEMA Series Assembly Manual page 3


Put the given spring on the screw and insert
the screw into the thread of the boom pole
cage.

Correctly insert the adapter set and secure it
with the ratchet knob on the other side of the
blimp cage.

Blimp cage properly secure with adapter
set as shown in the picture.

Attach the smaller size adapter with the
blimp cage to reduce the height of the boom
pole.
•
Once the end cap is attached to the
blimp windscreen, you can cover it using the
fur cover.
NOTE: The fur cover serves the purpose of
further minimizing the noise. You can use
60cm or 40cm fur cover depending on
whether the blimp is with or without the
extensio n.