Creating A User Tone - Casio PX-410R User Manual

Synthesizer Mode

Creating a User Tone

Use the following procedure to select a preset tone and change
its parameters to create a user tone.
1
First, select the preset tone you want to use as a
basis for your user tone.
2
Press the SYNTH button.
• This causes the SYNTH indicator to appear on the
display.
Parameter setting value
Currently selected parameter
0 0 A t
3
Use [ ] and [ ] CURSOR buttons to display the
parameter whose setting you want to change.
0 0 V i
• Each press of [ ] or [ ] CURSOR button changes to
the next parameter. See "Parameters and Their
Settings" on this page for information on setting range
for each parameter.
4
Use [+] and [–] to change the setting of the currently
selected parameter.
• You can also use the number buttons to input a value
to change a parameter setting. See "Parameters and
Their Settings" on this page for information on setting
range for each parameter.
5
After you are finished editing the sound, press the
SYNTH button to exit the Synthesizer Mode.
NOTE
• See "Storing a User Tone In Memory" on page E-48 for
details on saving user tone data to memory so it is not
deleted.
E-46
SYNTH
k T i m e
b D e l a
y
CURSOR
Parameters and Their Settings
The following describes the function of each parameter and
provides its setting range.
I Attack Time (Range: –64 to 00 to +63)
Time it takes before the tone sounds after a key is pressed
- 0 1 A t
I Release Time (Range: –64 to 00 to +63)
Time the tone continues to sound after a key is released
- 0 7 R e
I Cutoff Frequency
(Range: –64 to 00 to +63)
High-band cutoff for the harmonic components of the tone
- 0 6 C -
I Resonance (Range: –64 to 00 to +63)
Resonance of the tone
- 0 8 R e
Number buttons
[+] / [–]
k T i m e
l . T i m e
o f f F r
q
s o n a n .