Vari 401177 Assembly Instructions

Flip Top Training Table 5'
x1
LEFT FOOT
x2 a
CASTERS
WITH LOCK
x4
M5 X 28L PHILLIPS HEAD SCREW
REQUIRED TOOLS
(Not Included)
PHILLIPS HEAD SCREWDRIVER
1
x1
TABLE TOP
WITH LEGS
NOTE: To protect your new table, complete this step while it is still face down in the box.
x1
toward the edge of the table and hold in place. Rotate the legs 90 degrees until upright, then release the leg locking mechanism.
RIGHT FOOT
2
x2 b
CASTERS
WITHOUT LOCK
Following the "L" (left) and "R" (right) indicators on the feet and the interior side of the legs, insert the feet into the corresponding legs of the
table. Using a Phillips screwdriver and the included screws, secure both feet in position. If you purchased a modesty panel, please refer to the
separate instructions included with the modesty panel before moving on to the next step.
2 People Holds up to
Required 125 lb (56.7 kg)
Using two hands, pull the locking mechanism out