Advertisement
Quick Links
User Manual
DELUXX Cinema Frame
Screen SlimFrame
Thank you for choosing a quality product from DELUXX. Please read
this manual carefully before assembly and keep for future reference.
DELUXX®, a brand of celexon Europe GmbH
info@deluxx.com - Victory House, Chequers Road, Tharston, NR15 2YA
Advertisement
Related Manuals for Celexon DELUXX SlimFrame SoundVision SFSV-177X99
Summary of Contents for Celexon DELUXX SlimFrame SoundVision SFSV-177X99
- Page 1 DELUXX Cinema Frame Screen SlimFrame Thank you for choosing a quality product from DELUXX. Please read this manual carefully before assembly and keep for future reference. DELUXX®, a brand of celexon Europe GmbH info@deluxx.com - Victory House, Chequers Road, Tharston, NR15 2YA...
- Page 2 Hints Read before construction and always follow the instructions. Please check ALL parts for completeness and damage before assembly. If parts are missing or damaged do not continue with the construction and contact the supplier with whom you purchased the screen or contact DELUXX directly. The screen may ONLY be constructed on soft, padded ground.
- Page 3 In the box Aluminum velor cover (4x or 6x) Projection Fabric (1x) Aluminum frame parts (4x or 6x) Tension rods for fabric Corner connector incl. Screws for inner frame (4x) (4x or 6x) Corner connector incl. Screws for outer velor cover Springs for fabric Tool for springs Wall bracket...
- Page 4 Assembly of the screen Step 1 Slide the corner connectors of the inner frame into the short frame pieces, then slide them into the long frame pieces. (If you have a 6 piece frame, prior to this step, use the connectors for the inner frame pieces) Before tightening the screws, make sure that the frame parts are as perfectly aligned as possible with no gaps at the corners and at absolute right-angles.
- Page 5 Assembly of the screen Step 3 Carefully place the previously secured inner frame with 2 people, centered as well as possible on the projection fabric. Start with one corner, using 4 springs, the fabric can be attached using the tension rods and springs.
- Page 6 Assembly of the screen Wall mounting 1. Depending on the width of your frame, bring the wall brackets to approximately 1/3 and 2/3 of the frame width on your wall. Use only load bearing masonry or solid wood walls for mounting. The wall brackets must be absolutely level (use spirit level and mark).