Page 1
Operating instructions celexon Electric Expert and Expert XL Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting or operating this product. Please retain these instructions for future reference. Version: 32422_061...
Page 2
If you notice any external damage to the unit or any unexpected or unusual functioning, the product must not be used any further. Immediately contact the dealer from whom you purchased the product or celexon directly (Web: www.celexon.co.uk, Mail: info@celexon.co.uk) for further information.
Page 3
• If you are unsure about the use of the product, please contact specialist personnel, your dealer or celexon directly (Web: www.celexon.co.uk, Mail: info@celexon.co.uk). • Technical changes and errors expected. The manufacturer accepts no responsibility for damage to property or personal injury, if the screen is used outside the recommended specifications, or in the event of improper installation.
DISCLAIMER The information in this document is subject to change without notice by the manufacturer. Changes will be added to subsequent versions of this manual. Errors expected. CARE INSTRUCTIONS NEVER clean the screen with alcohol or other cleaning agents containing solvents.
IN THE BOX 1x Screen Mounting bracket 1 x Wall switch Motor Expert (2x) Motor Expert XL (4x) INSTALLATION NOTES Install the screen in a position that is fully visible to all viewers! The optimum installation height corresponds to the position of the viewers in the centre of the screen with the screen fabric extended: eye level = lower third of the screen surface.
Page 6
STEP 2 Lift the screen (with 2 people) and hook the casing firstly into the rear guide of the bracket with a slight turn and then fix the casing to the bracket from the front with the locking screws. Do not release the housing until the locking screw has connected the housing and the bracket together.
Page 7
STEP 4: STOP THE SCREEN To stop the projection screen manually, release the pressed button - the screen stops immediately. It is possible to set the stop points. Please request the instructions for this procedure from your specialist dealer or directly via www.celexon.com...
Page 8
Address: Gutenbergstraße 2, 48282 Emsdetten, DE Product name: celexon Electric Expert and Expert XL Products that are marked with the CE mark meet all requirements of the relevant EU directives. The EU declaration of conformity can be downloaded from the following address: www.celexon.de/zertifikate...
Page 9
Address: Gutenbergstraße 2, 48282 Emsdetten, DE Product name: celexon Electric Expert and Expert XL Products that are marked with the UKCA mark meet all requirements of the re- levant UK directives. The UK declaration of conformity can be downloaded from the following address: www.celexon.de/zertifikate...