Table of Contents
Advertisement
④ When connecting to the serial COM port of W5100S-EVB-Pico, use following settings
to set up the serial port.
-
Baud rate : 115,200
-
Data bit : 8
-
Parity bit : none
-
Stop bit : 1
-
Flow control : none
⑤ Reset your board.
⑥ If the Connect AWS IoT through MQTT example works normally on W5100S-EVB-
Pico, you can see the network information of W5100S-EVB-Pico, connecting to the
AWS IoT and publishing the message.
Copyright 2021 WIZnet Co., Ltd. All rights reserved.
Figure 22. Set up serial port
Advertisement
Table of Contents
