⑧ Add folder RP2040-HAT-AWS-C to Visual Studio Code
⑨ Visual Studio Code will scan for kits
⑩ Select 'Yes' when asked: Would you like to configure project RP2040-HAT-AWS-C?
⑪ Select 'Yes' if you like to configure the project upon opening
⑫ Click CMake in the bottom bar to select the kit RP2040-HAT-AWS-C
⑬ Select Debug / Release based on your preference
⑭ Visual Studio Code will save all file and configure the project
⑮ Click on Build to build all examples, if no error Build will finish with exit code 0
4.2 Other software required to develop and debug applications for the device
Serial terminal program is required for operation check and debugging.
∙
Tera Term
You may use your preferred serial terminal program.
Figure 15. Add CMake Generator name
Copyright 2021 WIZnet Co., Ltd. All rights reserved.