Set Up Your Hardware - Wiznet W5100S-EVB-Pico Getting Started Manual

4.3 Other pre-requisites
None
4.4 Additional Software References
Refer to the '9.2. Building on MS Windows' section of 'Getting started with Raspberry Pi Pico'
document below to set up the development environment.
∙
Getting started with Raspberry Pi Pico
And refer to the links below for instructions how to setup environment and proceed with tests.
∙
Getting Started with AWS IoT SDK Examples
∙
Connect AWS IoT through MQTT

5 Set up your hardware

Figure 16. W5100S-EVB-Pico front
Copyright 2021 WIZnet Co., Ltd. All rights reserved.