Attaching The Grid - AGFA DX-D 10C User Manual

28 | DX-D 10C, DX-D 10G, DX-D 20C, DX-D 20G | Basic Workflow

Attaching the Grid

To attach the grid to the DR Detector
1. Lay down the grid on a flat surface.
2. Lay the DR Detector in the grid, bottom edge first, with the tube side
facing down.
3. Attach the grid to the DR Detector.
2
1.
2.
Figure 4: Example: attaching the grid to the DX-D 20G or DX-D 20C
0129E EN 20180312 0812
Grid
DR Detector
WARNING:
Use only the grid that is supplied as option to the DR
Detector.
1