Table of Contents
Advertisement
ON/OFF
Button
Micro USB
charge
*After the controller
shell is unplugged
1/4Screw
1. Install Motor
Install the motor on the 15mm rod and make sure the motor
gear matches with the lens gear.( If it install on DSLR Camera
lens, please use the camera hot shoe clamp.)
Step 3.
Install battery.
Step 2.
Locking U-clamp.
Lights For
Controller Status
Battery
compartment
Antenna
CALIBRATION/
RESET Button
Lights For
Motor Status
Note: If using a DSLR camera
*
lens,the lens will need a 0.8
lens zip gear in order to fit with
the motor gear.
0.8 Gear
Battery
Step 1.
Install the
motor on
15mm rod.
Advertisement
Table of Contents
