Advertisement
Instruction Manual
Micro USB Charge Interface
Antenna
Lights For
Controller Status
Focus Control Wheel
1.Install Motor
Install the motor on 15mm rod and make sure the motor gear
match with the lens gear.
3.Install battery.
2.Locking U-clamp.
CALIBRATION/
RESET Button
Lights For
Motor Status
ON/OFF
CHANNEL Button
1. Install Motor
Install the motor on the 15mm rod and make sure
the motor's gear wheel connects with the lens gear.
*Note: If using a DSLR camera lens, you'll need to
attach the extra lens gear, and ensure that it
connects with the motor's gear wheel.
www.pdmovie.co.uk
Antenna
1.Install the motor
on rods.
0.8 Gear
U-clamp
Battery
2
Advertisement
