Advertisement
Front Sketch Map
Lights For
Motor Status
Bottom Sketch Map
1. Install Motor
Install the motor on 19mm or 15mm (using the adapter) rods. At the same time, the motor gear
stuck on the lens gear. Then install the antenna to the main motor PD-RX.
1.Install the motor
on (15/19mm) rods.
Channel Button
2.Locking U-clamp.
Motor
Product Sketch Map
0.8 Gear
Antenna
OLED Screen
U-clamp
Install
Left Side Sketch Map
REMOTE
Instruction Manual
3.Install the Antenna
and the Power Cable.
7V-20V
Advertisement
