PDL-AFP/AZP Instruction Manual
Micro USB
Charge Interface
Lights For
Controller Status
Focus Control
Wheel
1. Install Motor
Install the motor on the 15mm rod and make sure the motor
gear matches with the lens gear.( If it install on DSLR Camera
lens, please use the camera hot shoe clamp.)
Step 3.
Install battery.
Step 2.
Locking U-clamp.
CALIBRATION/
RESET Button
ON/OFF
Button
Lights For
Motor Status
Antenna
Step 1.
Install the
motor on
15mm rod.
*
Note: If using a DSLR camera
lens,the lens will need a 0.8
lens zip gear in order to fit with
the motor gear.
0.8 Gear
U-clamp
Battery