PDMOVIE Live Air 2S Product Manual page 10

To replace the battery of the motor, you need to press the battery to the right first, and
then pull it out. (Refer to the direction of the laser indicator on the lower right of the motor.)
If the battery is difficult to access due to excessive sweating, you can use a power sticker
to help remove the battery.
Notice
- Stop calibration: the motor jumps teeth during the automatic calibration process,
which causes the phenomenon of non-stop rotation. You only need to click once
of the motor button to terminate the calibration;
- When the rotation stroke of the motor does not match the calibrated stroke,
please check whether the indicator light of the Bluetooth controller is flashing blue
and the current battery color alternately. If the above state appears, it means that
the controller has set the stroke of point AB Limit, you need to short press the
controller button to start AB automatic operation, and then short press again to
cancel the automatic operation and cancel the AB point stroke limit.
- The controller defaults FOCUS mode. If it is switched to ZOOM mode, it will be
equally divided based on the rotation of the wheel 300 degrees, and the middle
10 degrees is the static position. Turn to the left to advance forward, and turn to
the right to advance backward. The advancing speed is adjusted linearly
according to the angle of rotation.
- The motor defaults to the lens control mode. For example, after switching to the
electric slide/pan/tilt mode, when the motor starts without Bluetooth connection, it
will automatically calibrate the stroke and run automatically in a constant speed
cycle.
- Regarding battery maintenance: When the product is not used for a long time, it
is recommended to check the power of the device every other month to ensure
that the battery has sufficient power; when the device is in a low or no power state
for a long time, the battery capacity will decrease.
Press the battery
to the right first
Stop
Slow
Fast
Then unplug the battery
Slow
*ZOOM mode needs to be used
with ZOOM RIG accessories.
Fast