Husqvarna 28508915044 Manual page 14

All manuals and user guides at all-guides.com
- Position the chainguard fairing on the chainguard.
- Mount original screws and tighten to 2.1 Nm.
- Position the entire chainguard.
- Mount original nut , but do not tighten yet.
- Mount original screw but do not tighten yet.
- Mount screw (included) and tighten to 5 Nm (Loctite 243).
- Tighten screw to 7 Nm (Loctite 243).
- Tighten nut to 5 Nm.
Final steps
- Install right side fairing (see owner's manual).
- Mount seat (see owner's manual).
- Check that the lighting is functioning properly.
14