Configuring The Evaluation And Symbologies - REA VeriCube Operating Manual

Table of Contents

Matrix middle points

The middle points of the matrix cells are highlighted with green dots

Warnings

With this button, all matrix cells (when active) are marked yellow, which, in relation

to the modulation and the contrast measurement values, are close to the limit

between two grades. The more such modules appear, the higher is the risk for a

given measurement result to oscillate between two grades.

Error indication

All matrix cells which can be handled by the error correction are highlighted with red

dots. This always occurs when a given matrix cell is recognized as dark instead of

bright or vice versa. Depending on the symbology and code size, the error correction

can recognize these errors and facilitate the correct decoding to a certain limit. When

the capacity is exhausted, it is attempted to obtain a result with a non-standard

decoding (error: Reference decode failed). If this does not aid the decoding, then no

further decoding is possible.

12 Configuring the evaluation and symbologies

In this section, the essential REA VeriCube configurations are described. This

configuration is performed with the help of the Windows software TransWin32. The

detailed description of TransWin32 is in a separate operating manual.

REA VeriCube Operating Manual Version 2.16 – 11/2020

Page 80 of 119

Table of Contents

Show Quick Links

Table of Contents