Introduction; Delivery Scope; Basic Configuration - REA VeriCube Operating Manual

1

Introduction

The REA VeriCube is a measurement device for the quality control of printed 2D
matrix codes and 1D barcodes. This is a stationary device, which has to be connected
to a PC via an Ethernet network. The application software along with the device
driver and the display of the test reports run on a computer running Microsoft
Windows.
In contrast to a scanner for barcodes and matrix codes, REA VeriCube is an optically
operating measurement device. Measurement devices are subject to a regular
adjustment and calibration (monitoring of testing equipment). Adjustment and
calibration (monitoring of testing equipment) can be performed by the operator and
as long as calibration is successful, there is no need to return the unit to the
manufacturer.
An overview of all Verifier variants and brochures can be found on our website:
https://www.rea-verifier.com
2

Delivery scope

The REA VeriCube in its basic configuration is delivered in cardboard packaging and
fitting foam padding with the following parts:
2.1

Basic configuration

1 REA VeriCube, test unit with operating unit as per delivery note (see following
chapter for available types)
1 optic module, exchangeable, according to the delivery note (built into the unit)
1 Plexiglas dust-protection cover – built-in in transport (must be replaced with a
glass plate during commissioning)
1 anti-reflective glass plate
1 GigaBit PoE power supply unit (100–240V, 30W) (06113003)
1 power cable for the ordered plug standard (Euro, UK, US)
2 network cables, highly flexible, RJ45 CAT7 (08316608)
1 printed operating manual (this document)
1 USB stick with software and documentation (08316300)
1 calibration card, serialized, in a protective envelope (90031702)
1 test report of the reference code of the calibration card, created with the delivered
VeriCube for documenting the delivery status
1 test report of the reference code (req. for test equipment monitoring)
© REA Elektronik GmbH, Teichwiesenstraße 1 D-64367 Muehltal
REA VeriCube Operating Manual Version 2.16 – 11/2020
(08316280) (separately packaged)
Page 7 of 119