Behaviour Of The Software Transwin32 When Locking The Pc; View Of The Reports - REA VeriCube Operating Manual

11.13 Behaviour of the software TransWin32 when locking the PC

In the settings of the software you can specify how TransWin32 should behave, if
during a session in TransWin32 the PC is locked or the screen saver is activated.
In the menu >Configure >Options >General Settings it can now be selected, if the
TransWin32 session should be closed automatically when the PC is locked or if the
event should be ignored and thus the TransWin32 session remains:
When a Windows user logs off, the TransWin32 software is always closed.
If unsaved measurements were previously open, they are automatically saved in the
default path from "file saving".

11.14 View of the Reports

Depending on the preset values in the options, the level of detail of the individual
test reports displayed can be adjusted and changed based on the individual
requirements.
After a new installation of the software, the simple report will be displayed by default
with every measurement, like shown in the following:
© REA Elektronik GmbH, Teichwiesenstraße 1 D-64367 Muehltal
REA VeriCube Operating Manual Version 2.16 – 11/2020 Page 74 of 119