Rea Scancheck 3N With Pc Evaluation Software - REA ScanCheck 3n Operating Manual

Streamlining • Development • Automation
Electronic Devices and Systems
3.4

REA ScanCheck 3n with PC Evaluation Software

The REA ScanCheck 3n can be operated independently, connected to the portable REA TD-GPT-U
printer as well as on a PC with optional PC software programs REA TransWin32 or REA Article
Database 32.
The unit has 2 different plug sockets on the lower face for
the corresponding connections. The REA ScanCheck 3n
can be connected with the report printer with the right
USB host port, type A, via the supplied USB connection
cable and verification reports can thereby be printed out.
Via the left-hand RJ45 type network port, the
REA ScanCheck 3n can be connected to the supplied
PoE power supply via the supplied network cable and
operated. The network cable provides the external power
supply as well as data communication via TCP-IP protocol. The connection options are described
below.
The software REA TransWin32 is not included in the standard scope of delivery of a REA ScanCheck 3n. If
REA TransWin 32 was ordered, the necessary license key is already stored in the verification unit ex
factory. If not equipped until later, a license key supplied with the delivery note must be entered on the unit
(see Chapter 4.6.3.4.3).
The PC used for the program REA TransWin32 should have the following hardware configuration at
minimum:
- CPU processor with 1.5 GHz and at least 1 GB RAM
- Hard drive with at least 500 MB of free storage space
- Color graphics card with minimum resolution of the monitor
- 1 CD-ROM or DVD drive
- 1 free USB 1.1 interface (for connecting REA ScanCheck 3, REA PC-Scan)
- 1 serial interface (for connecting REA PC-Scan, REA ScanCheck and REA ScanCheck II as well as
REA Check 3)
- 1 color monitor with at least 1280 x 1024 pixel resolution or more
The software configuration should be at least the following:
- Microsoft Windows 2000 with SP4, Windows XP with SP2 or Windows Vista
- .NET Framework from vers. 2.0
- Microsoft Internet Explorer IE from version 6.0
- Microsoft Windows Installer from version 3.1
The software was successfully tested with operating software versions Microsoft Windows 2000 with
Service Pack 4, Windows XP Professional with Service Pack 2, Windows 7 and Windows Installer 3.1.
Additional details on unit connection to the PC network can be found both in the manual for
REA TransWin32 and in the separate document on network installation of REA Verifiers on the REA Verifier
CD-ROM.
Administrator rights are required for installation of the software and configuration on the PC. If the user
account does not have administrator rights, the installation aborts with a corresponding error message.
© REA Elektronik GmbH
D-64367 Mühltal-Waschenbach
+49 (0) 6154-638 0
REA ScanCheck 3 - August 2010
www.rea-verifier.de
REA
Page 18 of 89
Elektronik
GmbH