Valor H5 Series Installation Manual page 5

Clean installation kit

Hide thumbs Also See for H5 Series:

Available languages

5. Install the top panel as indicated (3 x 1/2" screws).

6. Ensure the appliance is snug against the framing

and secure it to the studs on each side (5 ﬁ xing

points per side). Use wood screws (not supplied with

this kit).

7. Set aside the side doors, removable panel and bar-

rier screen to install later when the appliance's set-

up and wall ﬁ nish application are completed.

8. Continue the installation of the appliance as indi-

cated in the H5 Installation Manual.

Finish kit installation

Once the appliance installation and wall ﬁ nish is

completed, ﬁ nish the installation of the framing kit.

1. Slide the removable panel at the bottom of the

ﬁ replace into the clips on the horizontal supports on

each side; the panel covers the valve and goes

under the ﬁ rebox. Push the panel in until fully

inserted into the clips.

2. Identify left hand door from right using diagram

below.

Left Side Door

Tab at the bottom

Right Side Door

Table of Contents

1130cik