Table of Contents
Advertisement
6.2 - Other signals
Table A22 - other LED signals
Color
2 red flashes
3 red flashes
3 orange flashes
6 red flashes
6 orange flashes
3 yellow flashes
5 yellow flashes
7
TECHNICAL SPECIFICATIONS
The product BiDi-Shutter is produced by Nice S.p.a. (TV). Warnings: - All technical specifications stated in this section refer to an ambient
temperature of 20 °C (± 5 °C) - Nice S.p.a. reserves the right to apply modifications to the product at any time when deemed necessary, while
maintaining the same functionalities and intended use.
BiDi-Shutter
Type
Power supply
Motor rated current
Motor rated power
Recommeded wires cross-section
Required circuit breaker
Casing protection rating
Operating temperature
Dimensions (mm)
Weight
Radio transceiver
Frequency band
Code
No. of memorisable transmitters
Transceiver range
Max. transmit power
(*) The transceiver range is strongly influenced by other devices operating at the same frequency with continuous transmission, such as alarms
and radio headphones which interfere with the control unit transceiver.
8
PRODUCT DISPOSAL
This product is an integral part of the automation and therefore must be disposed together with the latter.
As in installation, also at the end of product lifetime, the disassembly and scrapping operations must be performed by qualified personnel. This
product is made of various types of material, some of which can be recycled while others must be scrapped. Seek information on the recycling
and disposal systems envisaged by the local regulations in your area for this product category.
Caution! – some parts of the product may contain pollutant or hazardous substances which, if disposed of into the environment, may cause
serious damage to the environment or physical health.
As indicated by the symbol alongside, disposal of this product in domestic waste is strictly prohibited. Separate the waste into categories for dis-
posal, according to the methods envisaged by current legislation in your area, or return the product to the retailer when purchasing a new version.
Caution! – local legislation may envisage serious fines in the event of abusive disposal of this product.
9
DECLARATION OF CONFORMITY
Hereby, NICE S.p.A., declares that the radio equipment type BiDi-Shutter is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: http://www.niceforyou.com/en/support
Description
Control unit initialized properly
Transmitter memorized in Mode I
Transmitter memorized in Mode II
Memory for transmitters full (Mode I)
Memory for transmitters full (Mode II)
Transmitter deleted from memory
Control unit restored to factory settings
480 VA for Vn = 240 V; 460 VA for Vn = 230 V; 240 VA for Vn = 120 V; 200 VA for Vn = 100 V
Compliant with IEC/EN 60898-1; Curve code: B; Rated current: up to 16 A;
Estimated at 150 m in open space and 20 m inside buildings (*)
in-wall/flush box mounted control unit for tubular motors
100–240 V AC, 50/60 Hz
2 A
0.5–4 mm
for 1 wire; 0.5–1.5 mm
2
Breaking capacity: 6 kA; Rated insulation voltage: 500 V;
Rated impulse withstand voltage: 4 kV;
IP 20
0–35 °C
45 x 36 x h 23
20 g
433.05–434.04 MHz
OPERA/FLOR (rolling code), PLN2+ (rolling code)
30, including climatic sensors
10 dBm
for 2 wires
2
Advertisement
Table of Contents
