Cleaning Windows; Turning On/Off; Vacuuming Windows - Silvercrest SFR 3.7 D6 Assembly, Operating And Safety Instructions

Cordless window vacuum cleaner
Table of Contents

Advertisement

Available languages

Available languages

˜ Cleaning windows
Rotate the spray nozzle 5 to the desired
 
setting:
Spray nozzle
STREAM
Jet stream .
SPRAY
Water mist stream .
OFF
No stream .
Spray the window .
 
Wipe over the sprayed areas with the
 
wiper 4 . Loosen stubborn dirt .
˜ Turning on/off
Turning the product on: Press
 
lights up blue .
Turning the product off: Press
 
The blue light goes off .
˜ Vacuuming windows
NOTES:
Do not hold the product upside down . Do
 
not move the product sideways .
The maximum capacity of the dirt water
 
container 8 is 270 ml . Stop operation when
the MAX marking of the dirt water container
is reached .
Turn on the product .
 
Move the blade of the vacuum
 
attachment 1 slowly from top to bottom .
When the MAX marking on the dirt water
 
container 8 is reached, turn off the product .
Empty the dirt water container 8 before
 
further operation .
NOTE: To empty the dirt water
container 8 , pull it out from the motor
unit 9 first . Remove the protective cap . Then,
empty the dirt water container .
˜ Cleaning and care
m DANGER! Risk of electric shock!
Before cleaning: Always disconnect the
product from the charger 2 .
5
m WARNING! Do not immerse the product's
electrical components in water or other
liquids . Never hold the product under
running water .
Do not use any abrasive, aggressive cleaners
 
or hard brushes to clean the product and its
accessories .
Cleaning the vacuum attachment 1 ,
suction head 12 and motor unit 9
10 .
Press the release button 13 to remove the
 
vacuum attachment 1 from the suction
10 again .
head 12 .
Press the eject buttons 11 to remove the
 
suction head 12 from the motor unit 9 .
Wipe down the parts with a slightly damp
 
cloth .
Do not let any water or other liquids enter
 
the product interior .
After cleaning: Let all parts dry completely .
 
Cleaning the water container 6 , dirt
water container 8 and wiper 4
Rinse the parts in water and/or mild
 
detergent .
After cleaning: Let all parts dry completely .
 
Cleaning the microfiber covers
The microfiber covers 3 can be cleaned in a
washing machine and in a dry cleaner .
GB/IE/NI/CY
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

373623 2104

Table of Contents