Silvercrest SFR 3.7 D6 Assembly, Operating And Safety Instructions page 10

Do not operate the product
while it is being charged .
Always charge the product
in an open area away from
flammable materials and
liquids .
Misuse can cause fire and
burns .
The product is not to be used
if it has been dropped, if there
are visible signs of damage or
if it is leaking .
Protect the connection cord
against damages .
Do not let it hang over sharp
edges, do not squeeze or bend
it . Keep the connection cord
away from hot surfaces and
open flames .
Ensure that nobody can pull on
or trip over it unintentionally .
The connection cord of the
charger cannot be replaced .
If the connection cord is
damaged, the charger must be
disposed of .
Operation
Before using the product:
Disconnect the charger from
the wall outlet .
Keep the charging socket
closed with the stopper at all
times to ensure the product's
ingress protection against
splashing water .
Do not obstruct the ventilation
slots during operation . A
blocked ventilation circuit
can result in overheating and
damage to the product .
No action is needed from users
to shift the product between
50 and 60 Hz . The product
adapts itself for both 50 and
60 Hz .
Cleaning and storage
Do not pull the charger out
of the wall outlet by the
connection cord .
Protect the charger against
dust, direct sunlight, dripping
and splashing water . Protect
the product against dust and
direct sunlight .
GB/IE/NI/CY 11