Evaporator Cover In The Refrigerator; Evaporator Fan Motor In The Refrigerator - Samsung RM255BABB Training Manual

DISASSEMBLY AND REASSEMBLY
3. Insert the flat-tip screwdriver into the center of
insulation-partition, and lift it up slightly to open
the door in the lower compartment. then lift the
insulation-partition upward to separate.

evaporator cover in the Refrigerator

For the disassembly of evaporator cover, water
tank and partition should be disassembled
first.
1. Remove the cap screws(4 pieces), and remove
other screws(4 pieces).
2. Pull the upper part of the evaporator cover slightly.
3. Separate the housing terminal connected to the
right side of evaporator cover, and lift it up carefully
using both hands.
Evaporator Fan Motor in Refrigerator
The evaporator fan is located in the middle rear
of the freezer. This fan circulates cold air in the
freezer.
1. Remove screws (4 pieces) from the four
corners of the fan bracket.
2. Disassemble the fan motor.
55 55