Partition In The Freezer; Evaporator Cover - Samsung RM255BABB Training Manual

DISASSEMBLY AND REASSEMBLY

PARTITION IN THE FREEZER

The Partition is located in the lower part of the
freezer.Before separating the partition,take out
all the shelves and cases which are above the
partition.
1. Unscrew the partition(a screws).
2. Insert the flat-tip screwdriver into the center
groove of the partition, and lift it up.
3. Insert the flat-tip screwdriver in the center
of insulation-partition, and lift it up slightly.
And then open the door in the power
compartment, and lift it upward to
separate.

EVAPORATOR COVER

For the disassembly of evaporator cover, water
tank and partition should be disassembled
first..
1. Remove the cap screws(2 pieces), and then
remove other screws(4 pieces).
2. Pull the upper part of the evaporator cover slightly.
3. Separate the housing terminal connected to
the right side of evaporator cover, and lift it up
carefully using both hands.
52 52
screws