Ice Dispenser Ice Maker; Freezer Light - Samsung RM255BABB Training Manual

DISASSEMBLY AND REASSEMBLY
Ice Dispenser Ice Maker
The ice dispenser is located in the upper portion
of freezer. This assembly is to store and
dispense ice made by the icemaker.
1. Lift the ice bucket up
dispenser assembly .
The Ice Maker is located inside of the Ice
Dispenser assembly
1. Remove Ice Maker Support screw(2),and pull
it out.
2. Disconnect the ice maker wire connector
3. Push the Locking Tab(1), and pull(2)the Ice
Maker Kit
and slide out the ice
52
50 50
In order to assemble the Icemaker Kit.
1. Align the Geard Motor Shaft with Ice Tray hole
to assemble.
2. Slide the IceMaker Kit like the arrow(1)
3. Connect the ice maker wire connector.
4. Align the tab holes with tabs(2) located in the
top of liner, and slide the ice maker inward.
5. Tighten the screws (2) of the ice maker
support.

Freezer Light

The freezer light is located in the bottom of auger
motor case. The light is covered with an opaque
cover.
1. Remove the light cover by pressing the cover.
Front hook