Table of Contents
Advertisement
Installation Instructions (Continued)
BEFORE INSTALLING THE COOKTOP, ENSURE
•
The work surface is square and level, and
no structural members interfere with space
requirements.
•
The work surface is made of a heat-resistant and
insulated material.
•
If the cooktop is installed above an oven, the oven
has a built-in cooling fan.
•
The installation will comply with all clearance
requirements and applicable standards and
regulations.
•
A suitable isolating switch providing full
disconnection from the mains power supply is
incorporated in the permanent wiring, mounted and
positioned to comply with the local wiring rules and
regulations.
•
The isolating switch must be of an approved type
and provide a 3 mm air gap contact separation
in all poles (or in all active [phase] conductors if
the local wiring rules allow for this variation of
the requirements).
•
The isolating switch will be easily accessible to the
customer with the cooktop installed.
•
You consult local building authorities and by-laws if
in doubt regarding installation.
•
You use heat-resistant and easy-to-clean finishes
(such as ceramic tiles) for the wall surfaces
surrounding the cooktop.
AFTER INSTALLING THE COOKTOP, ENSURE
•
The power supply cable is not accessible through
cupboard doors or drawers.
•
There is adequate flow of fresh air from outside the
cabinetry to the base of the cooktop.
•
If the cooktop is installed above a drawer or
cupboard space, a thermal protection barrier is
installed below the base of the cooktop.
•
The isolating switch is easily accessible by
the customer.
ADJUSTING THE FIXING BRACKETS
The unit should be placed on a stable, smooth surface
(use the packaging or a towel). Do not apply force onto
the controls protruding from the cooktop.
Fix the cooktop on the work surface by screwing four
brackets to the bottom of cooktop after installation.
Adjust the bracket position to suit for different work
surface's thickness.
WARNING
Under any circumstances, the brackets cannot touch
with the inner surfaces of the worktop after installation
(see image above).
14
Advertisement
Table of Contents
