Follett Horizon Elite 1810 Series Quick Start Manual page 4

1 – Locating the ice machine
Horizon Elite remote Chewblet ice machines allow top‑mounting or mounting in a base cabinet, on a wall or on a floor stand up to
75' (22.9 m) from the dispenser or ice bin with RIDE technology. In‑cabinet mounting (RIDE applications) require special attention to
service access, unit ventilation and ice tube runs (see pages 6‑7).
Top mounting – ice and beverage
dispensers (by others)
Important specifier notes
1. Dispenser must be compatible with
nugget ice. See page 5 for compatible ice
and beverage dispenser models and top
kit numbers.
2. Verify ceiling or soffit height to ensure
sufficient top clearance.
RIDE model – ice and beverage
dispensers (by others)
Important specifier notes
1. Dispenser must be compatible with nugget
ice. Compatible dispensers include Cornelius
DB/ED/DF150/175, Lancer 4500‑22N, FS‑16N
and FS‑44N, Servend MD150/175/200/250
SV150/175/200/250 and Follett Symphony
Plus 110CM, as well as dispensers listed on
™
page 5.
2. Coca‑Cola Freestyle 7100 requires top adapter
IC Code 46751 and ice kit IC Code 46430 only,
and must be ordered from Coca‑Cola. Coca‑
Cola Freestyle 9100 requires top kit HSF26SC.
Consult with Coca‑Cola and Follett to qualify
application prior to ordering.
3. RIDE application is approved only for Pepsi
Spire 3.0, 5.0 and 4.1 designed for top mount
ice machines and requires MSP24SC for
3.0 and MSP30SC for 5.0 and 4.1, ordered
separately. For manual fill versions of
Pepsi Spire 3.0, 5.0 and 4.1, contact factory.
4. See page 6 for critical clearance requirements.
4
Form# 8180
RIDE model – Follett low-profile
Vision ice and beverage dispensers
Important specifier notes
1. See page 6 for critical clearance
requirements.
2. Ice transport tube ships with Vision
ice and beverage dispenser (Vision
applications only).
RIDE model – drop-in beverage
dispensers (by others)
Important specifier notes
1. Compatible with the following dispensers:
Cornelius 1522, 1722, 2323 and Lancer
2200, 2300, 23300.
2. Requires 12.00" (30.5 cm) of access space
for installation on transport tube side.
3. See page 6 for critical
clearance requirements.
Top mount on Follett ice storage bins
Important specifier notes
1. See form# 8590 for bin sizing.
2. Verify ceiling or soffit height to ensure
top clearance.
3. Locate floor sink or grate and drains in front
of storage bin.
4. Do not position bin drain lines to block
Ice•DevIce bin cart.
™
RIDE model – Follett ice storage bins
Important specifier notes
1. See form# 8590 for bin sizing.
2. Locate floor sink or grate and drains in front
of storage bin.
3. Do not position bin drain lines to block
Ice•DevIce bin cart.
Remote 1810, 2110 series ice machine