Pylontech amber rock User Manual page 9

AR500's Feature
7. USB-A Port
USB-A fast charging port is compatible with various fast charging protocols, with a maximum power
of 24W. The USB fast charging module has load monitoring function. When all of 2 USB ports are
used at the same time, the device will dynamically adjust the output voltage and current to ensure
load safety.
8.USB-C Port
USB-C fast charging port is compatible with various charging protocols, with a maximum power of
27W.
The USB fast charging port has functions of short circuit and over-current protections.
9.AC Output Port
The AC inverter has protection functions, such as overload protection, over-temperature protection,
under-voltage protection, and over-voltage protection.
If the protection is activated during use, remove the load and restart the AC switch.
The AC maximum output is 300VA. The protection will be activated after 15 seconds duration of
1.3 times overload.Before use, ensure that the load power factor is over 0.8.
10.Fan
The intelligent air cooling of the device will start up or shut down based on the dynamic information
such as internal temperature, output power and etc.
11.Charging Ports
The device is equipped with two charging ports which are quick charging and standard charging.
Power-on activation function is available. If the charger is plugged in when the device is off, the
system will automatically start up. When the charger is in place, the device cannot be shut down.
Charging with grid: the device has a 4A standard charger and a 12A quick charger, which can be
fully charged in 9 hours and 3 hours respectively.
Charging with photovoltaic: the device can be charged with connection to the MPPT module of
12V output platform.
Charging with vehicle cigarette lighter: the device can be charged with the cigarette lighter port of a
vehicle with an engine displacement under 4.0L. The device's charging capacity depends on the
voltage of the lead-acid battery of the vehicle. When the voltage of the lead-acid battery is lower
than or equal to the device's battery voltage, charging will stop.
During charging, the equipment has over-voltage and over-current protection functions.
7