Advertisement
FEATURE SETUP
Set Time
You can choose to set the handset time manually, or you can allow
it to be set automatically with incoming Caller ID information.
1
MENU
Press
on the handset.
2
Press
until the screen displays
OK
3
Press
. The screen displays the current time setting.
Use
to move the cursor, use the keypad to change a
digit. Select
.
AM/PM
4
SAVE
Press
to save the displayed time.
•
NOTE: To set up the answering system clock, please refer
to ANSWERING SYSTEM section on this page or see "Set the
Clock" in ANSWERING SYSTEM OPERATION on page 50 of
your User's Manual.
Clock Mode
You can choose to display the time when the phone is idle at the
handset, or you can turn this feature off. The default setting is ON.
MENU
1
Press
on the handset.
2
Press
until the screen highlights
3
OK
Press
. The screen displays
OFF
ON
4
Press
or
5
OK
Press
to save the displayed setting.
Sound Select
This telephone uses the latest acoustic receiver design, providing
you with four different sound quality settings.
During a call, you can adjust the quality of the sound. Pressing
repeatedly will cycle you through four different
responses.
•
NOTE: The mid-boost setting is hearing-aid compatible.
BASS – Low frequency sounds enhanced.
(continued)
CALLS LOG
INTERCOM
HANDSET SETTINGS
SET TIME
L
OK
INTERCOM
HANDSET SETTINGS
SET TIME
CLOCK MODE
CLOCK MODE
L
OK
CLOCK ENABLE
ON
OFF
OK
.
Sound Select
MID – Mid-range sounds enhanced.
TREBLE – High frequency sounds enhanced.
M
NATURAL – No frequency enhancement.
•
NOTE: This feature is available only on the handset, not on
the speakerphone or optional headset.
ANSWERING SYSTEM
Turn Answering System On/Off
Press O to turn the system on or off. When the system is turned
on, you will hear "Machine on" and the ON/OFF light will be lit.
M
If you turn the system on, it works using the default setting and
pre-recorded outgoing announcements. For details on recording
your own outgoing announcements and changing system settings,
see "ANSWERING SYSTEM OPERATION" starting on page 50 of
your User's Manual.
Set the Clock
ON
1
Make sure the answering system is on.
Press t. The system announces the clock setting, then
2
announces "To change clock, press t."
Press t.
3
Press c until the system announces the correct day, then
4
press t.
Press c until the system announces the correct hour,
5
then press t.
Press c until the system announces the correct minutes,
6
then press t. The system announces the current clock
setting.
NOTE: You can press and hold c to advance the
•
minutes settings by tens.
© 2002 Advanced American Telephones. All Rights Reserved.
AT&T and the Globe Design are trademarks of AT&T Corp.,
licensed to Advanced American Telephone.
(continued)
Printed in China. Issue 2AT&T 10/02
Advertisement
