Lifting The Unit - Generac Power Systems MAGNUM MDG20IF4 Operating Manual

Operation

LIFTING THE UNIT

A central lift point is located on the top of the unit. The central lift point is connected to a lift structure inside the unit.
Attach a sling or hook directly to the central lift point only if the devices are in good condition and the equipment
being used to raise the unit has sufficient capacity. For approximate weights, refer to "Specifications". Always remain
aware of people and objects around when moving or lifting the unit. Keep the doors closed and locked. Use the
upper or lower forklift pockets with care. Approach the unit as perpendicular as possible to avoid any damage to the
unit. Make sure any obstructions are clear of the forklift tines before lifting.
UNIT WITH STANDARD
FORKLIFT POCKETS
24
Forklift
Pockets
Figure 24 - Lifting the Unit with Forklift
MDG20IF4-MLG20IF4 Operating Manual
UNIT WITH OPTIONAL
LIFT STRUCTURE
Forklift
Pockets
Forklift
Pockets
Central
Lift Point
00887
37100 B