Introduction - Generac Power Systems MAGNUM MDG20IF4 Operating Manual

This manual provides information and procedures to safely operate and maintain the Generac Mobile Products unit.
For your own safety and protection from physical injury, carefully read, understand, and observe the safety
instructions described in this manual. Keep a copy of this manual with the unit at all times. The information
contained in this manual was based on machines in production at the time of publication. Generac Mobile
Products reserves the right to change any portion of this information without notice.
Read all of the manuals included with the unit. Each manual details specific information regarding items such as
setup, use and service requirements. An engine operator's manual provides detailed operation and maintenance
procedures for the engine. Additional copies of the engine operator's manual are available from the engine
manufacturer.
DO NOT MODIFY or use this equipment for any application other than for which it was designed.
Only a trained and licensed electrician should perform wiring and connections to unit. Wiring must be in compliance
with National Electrical Code (NEC), state and local regulations, as well as Occupational Safety and Health
Administration (OSHA) guidelines.
Engine Make:__________________________________________
Engine Serial Number:___________________________________
Engine Model Number: __________________________________
Generator Make: _______________________________________
Generator Model Number: ________________________________
Generator Serial Number: ________________________________
Unit Model Number:_____________________________________
Unit Serial Number: _____________________________________

Introduction

iii