Installing The App; Charging The Battery; Led Charging Status Indicator - FujiFilm instax mini Link 2 User Manual

Installing the App

Please install the mini Link Smartphone App before using the
printer.
• If you are using an Android OS smartphone, please search for
the mini Link Smartphone App in Google Play Store and install
it.
*Requirements for Android OS smartphones: Android Ver. 7.0
or higher with Google Play Store installed
• If you are using an iOS smartphone, please search for the
mini Link Smartphone App in the App Store and install it.
*Requirements for iOS smartphones: iOS Ver. 12.0 or higher
• Even if you have downloaded the app and your smartphone
meets the above requirements, you may not be able to use the
mini Link Smartphone App. This is dependent upon your
smartphone model.
Access instax mini Link app download site for the latest
information on system requirements�
Scan to download the mini Link Smartphone App
iOS
The text QR Code itself is a registered trademark and wordmark of
Denso Wave Incorporated.
4
Android OS

Charging the Battery

Ensure Micro USB is correctly attached as indicated.
Connect the printer using the supplied Micro USB cable to a USB
AC adapter (supplied with your smartphone) then connect the
USB AC adapter to an indoor power supply.
• You can print an image while charging is in progress.
• Charging time is approximately 80 to 120 minutes.

LED charging status indicator

Check the charging status with your smartphone when connected
to the app.
Indication
LED lights up in white
LED flashes in white
* When the printer is turned off, the LED goes off after the
charging is completed. When the printer is turned on and not
connected with the app, the LED lights up in white after the
charging is completed.
Charging from a PC:
• Connect the printer and PC directly. Do not connect via a USB
hub or keyboard.
• If the PC goes into sleep mode while charging, charging is
discontinued. To continue charging, exit sleep mode and then
reconnect the Micro USB cable.
• The battery may not be able to charge depending on the
specifications, settings or conditions of the PC.
Notes
• The battery has not been fully charged at the factory, be sure
to charge the battery before using the printer.
• The battery cannot be removed.
• For notes about the battery, see "Simple Printer Care". (p.14)
Charging status
Not charging
Charging