Installing The Instax Square Link App; Charging The Battery; Charging Status Indication With The Led - FujiFilm instax square Link User Manual

Installing the INSTAX SQUARE LINK App

Please install the free INSTAX SQUARE LINK Smartphone App on
your Smartphone before using the printer.
• If you are using an Android OS Smartphone, please search for
the INSTAX SQUARE LINK Smartphone App in the Google Play
Store and install it.
*Requirements for Android OS Smartphones: Android Ver. 7.0
or higher with Google Play Store installed
• If you are using an iOS Smartphone, please search for the
INSTAX SQUARE LINK Smartphone App in the App Store and
install it.
*Requirements for iOS Smartphones: iOS Ver. 12.0 or higher
• The INSTAX SQUARE LINK App may not be fully compatible with
all versions and models of Smartphones.
Access the INSTAX SQUARE LINK App download sites below for
the latest information on system requirements�
Scan to download the INSTAX SQUARE LINK Smartphone
App
iOS
https://instax.com/square_link/ios.html
Android OS
https://instax.com/square_link/
android.html
The text QR Code itself is a registered trademark and wordmark of
Denso Wave Incorporated.
4

Charging the Battery

Note that a USB AC adapter is not included, but is typically
provided with your Smartphone or otherwise purchased
separately.
Connect the printer with a USB AC adapter (not included with
INSTAX SQUARE LINK printer) using the supplied USB Type-C cable,
then connect the USB AC adapter to an indoor power outlet.
• You can print an image while charging is in progress.
• Charging time is approximately 80 to 120 minutes.

Charging status indication with the LED

When the printer is turned on:
Indication
LED lights up in white
LED flashes in white
When the printer is turned off:
Indication
LED is turned off
LED flashes in green
Check the charging status with your Smartphone when connected
to the free INSTAX SQUARE LINK App.
Charging from a PC:
• Connect the printer and PC directly. Do not connect via a USB
hub or keyboard.
• If the PC goes into sleep mode while charging, charging is
discontinued. To continue charging, exit sleep mode and then
reconnect the provided USB Type-C cable.
• The battery may not be able to charge depending on the
specifications and settings or conditions of the PC.
Notes
• The battery has not been fully charged at the factory. Be sure
to charge the battery before using the printer.
• The battery cannot be removed.
• For notes about the battery, see "Printer Care". (p.13)
Plug USB AC adapter
into an indoor power
outlet
Charging status
Not charging or charging is completed
Charging
Charging status
Not charging or charging is completed
Charging