Installing The App; Charging The Battery; Battery Status Indication With The Led; Charging Status Indication With The Led - FujiFilm instax mini Link User Manual

Installing the App

Please install the mini Link Smartphone App before using the
printer.
• If you are using an Android OS smartphone, please search for
the mini Link Smartphone App in Google Play Store and install
it.
*Requirements for Android OS smartphones: Android Ver. 5.0
or higher with Google Play Store installed
• If you are using an iOS smartphone, please search for the
mini Link Smartphone App in the App Store and install it.
*Requirements for iOS smartphones: iOS Ver. 10.0 or higher
• Even if you have downloaded the app and your smartphone
meets the above requirements, you may not be able to use the
mini Link Smartphone App. This is dependent upon your
smartphone model.
Access instax mini Link app download site for the latest
information on system requirements�
4

Charging the Battery

Ensure USB is correctly attached as indicated.
Connect the printer using the supplied USB cable to a USB AC
adapter then connect the USB AC adapter to an indoor power
outlet.
• You can print an image while charging is in progress.
• Charging time is approximately 80 to 120 minutes.

Battery Status Indication with the LED

Battery status can be determined whilst the printer is not
connected to the app. Battery status can also be checked whilst
the printer is connected to your smartphone via the app.
Indication
LED lights up in red
LED lights up in green

Charging Status Indication with the LED

Battery status can be checked with the LED.
Indication
LED flashes in red
LED flashes in green
LED lights up in green
(When the printer is turned
on and not connected to
the app)
LED goes off (When the
printer is turned off )
Charging from a PC:
• Connect the printer and PC directly. Do not connect via a USB
hub or keyboard.
• If the PC goes into sleep mode while charging, charging is
discontinued. To continue charging, exit sleep mode and then
reconnect the USB cable.
• The battery may not be able to charge depending on the
specifications, settings or conditions of the PC .
Notes
• The battery cannot be removed.
• The battery is not fully charged when shipped. Be sure to
charge the battery before use.
• For notes about the battery, see "Common Sense Printer Care".
(p.12)
To an indoor power
outlet
Battery status
Low battery remaining
Battery is over halfway charged
Charging status
Charging
Charging almost complete
Charged
Charged