Table of Contents
Advertisement
Before Use
Before using the printer, check the following has been included
with your printer.
Supplied Accessories
• Micro USB cable for
charging (1)
(BOD700-200)
The battery has not been fully charged at the factory, be sure
to charge the battery before using the printer.
Notes on Disposing of the Printer
A built-in lithium ion battery is used for this printer.
When you dispose of the printer, follow your local regulations and
dispose of it properly.
Please refer to the supplied CONTACT INFORMATION sheet for
inquiry.
If your country or region is not included in the sheet, please
contact your local distributor.
CAUTION
Do not remove the built-in battery by yourself; otherwise, you may
be injured.
Disposal of Electric and Electronic Equipment in Private
Households
Disposal of used Electrical & Electronic Equipment
(Applicable in the European Union and other European
countries with separate collection systems)
This symbol on the product, in the manual and in the warranty,
and/or on its packaging indicates that this product should not be
treated as household waste. Instead it should be taken to an
appropriate collection point for the recycling of electrical and
electronic equipment.
By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences to the environment and
human health, which could otherwise be caused by inappropriate
waste handling of this product.
The recycling of materials will help to conserve natural resources.
For more detailed information about recycling this product, please
contact your local city office, your household waste disposal
service or the shop where you purchased the product.
In Countries outside of EU: If you wish to discard this product,
please contact your local authorities and ask for the correct way of
disposal.
This Symbol on the batteries or accumulators indicates
that those batteries should not be treated as household
waste.
For customers in Turkey:
EEE Complies with Directive.
Read "IMPORTANT SAFETY NOTICE" (p. 13) for safety use.
3
• User's Guide (1)
Part Names
When using the printer for the first time, ensure that the battery
is fully charged.
Front
2
1
3
Rear
8
1
Film ejection slot
2
Feature button
3
Power button/LED*
1
4
Micro USB port cover
5
Micro USB port
6
Reset button*
2
7
Film door lock
8
Side LED
9
Film door
*1 For details on the LED indication status, see pages 4 and 6.
*2 If the printer does not work properly, press the reset button to
reset the printer.
6
5
4
7
9
Advertisement
Table of Contents
