Jensen JEP-725 User Manual page 10

Wake to Radio (FM, AM or WEATHER)
If "rAd" was selected,
reached. The corresponding
The unit will turn on and play the last radio station and band you listed to (FM, AM or
Weather) when the wake time is reached, so make sure the band and station is set to
the one you want to wake up
The volume level will gradually increase from low to high. This cannot be changed.
Press the SNOOZE BUTTON (#11) to temporarily turn off the radio, or tap he ALARM 1
BUTTON (#8), ALARM 2 BUTTON (#10) or
If no buttons are pressed when the radio is playing, it will continue playing for 60 minutes
and then turn off automatically.
Wake to Alarm
• A beeping Alarm will automatically turn on when the alarm time is reached.
corresponding ALARM 1 ICON (#22) or ALARM 2 ICON (#23) will flash.
• Press the SNOOZE BUTTON (#11) to temporarily turn off the alarm, or tap the ALARM
1 BUTTON (#8), ALARM 2 BUTTON (#10) or
If no buttons are pressed when the alarm is sounding, it will continue sounding for 60
minutes and then turn off automatically
Turning the alarm ON or OFF
1. In standby mode, press and hold the ALARM 1 BUTTON (#8).
2. The ALARM 1 ICON (#22) will begin flashing.
3. Either "ON" or "OFF" will also begin flashing on the LCD DISPLAY (#12).
4. Tap the TUNE - or TUNE + BUTTONS (#5 or # 7) to change between "ON" (Alarm 1 ON)
or "OFF" (Alarm 1 OFF).
5. Select "ON" (Alarm 1 ON) in order to have alarm 1 wake you.
6. Select "OFF" (Alarm 1 OFF) to disable Alarm 1.
7. After a few seconds the display will automatically switch back to the time.
Follow Steps 1-7 above, but use the ALARM 2 BUTTON (#10) in place of the ALARM 1
BUTTON (#8) to turn Alarm 2 ON or
Review the Alarm time setting:
1. In standby mode, press and hold the ALARM 1 BUTTON (#8), The ALARM 1 icon (#22)
and the On/Off setting show on the LCD DISPLAY (#12) and flash.
2. Tap the ALARM 1 BUTTON (#8) to check the hour of the alarm time.
3. Tap the ALARM 1 BUTTON (#8) again to check the minute of the alarm time.
4. Tap the ALARM 1 BUTTON (#8) again to check the wake up option.
5. Tap the ALARM 1 BUTTON (#8) again return to standby mode.
6. Review the ALARM 2 setting uses the same steps above, but using the ALARM 2
BUTTON (#10) in place of the ALARM 1 BUTTON (#8).
Notes:
• For setting a one-day alarm, just set the desired alarm time one day before.
• The alarm will sound at the time set the day prior. After having switched off the alarm
sound, press and hold the corresponding alarm button and follow the above step 1 & 2 to
disable the alarm (the alarm icon will off).
• To set another one-day alarm, just repeat the above steps.
the Radio will automatically turn on when the alarm time is
ALARM 1 ICON (#22) or ALARM 2 ICON (#23) will
to.
OFF.
E-9
BUTTON (#9) to turn the alarm off.
BUTTON (#9) to turn the alarm off.
flash.
The