6.4 Communication
The system has an external USB interface, which contains 5V power supply and RS485 communication.
The Redx unit has a built-in data collector. Users can choose to connect their own data collector
(WIFI/GPRS function) according to their requirements, and use the computer or mobile phone APP to
monitor the machine.
7 RX-2505AC System turn on and turn off
7.1 Turn on RX-2505AC system
You can perform the following steps to start the RX-2505AC:
1) Connect to the grid
2) Turn on the battery circuit breaker
3) Turn on the power button
4) When the LED display is normal, the system starts normally.
7.2 Turn off RX-2505AC system
1)
Turn the unit off from the power button
2)
Turn off the battery circuit breaker
3)
Turn off the AC circuit breaker
4)
When the LED display is off, the system is completely off.
8 Troubleshooting & Maintenance
8.1 Troubleshooting
Once a fault occurs in the storage unit, the fault information will be displayed on the APP/web interface.
Rev 20220606
Figure 6-1 - Network diagram
RX2505AC
Page 27 of 35