Take Pictures In A Sequence; You In The Picture-Self-Timer - Nokia N Series User Manual

memory the image consumes. If you want to print the
image, select Print 3M -
Print 1.3M - Small. If you want to send it through e-mail,
select Print 1.3M -
MMS, select MMS
These resolutions are only available in the main camera.
Add to album—Select whether you want to save the
image to a certain album in Gallery. If you select Yes, a
list of available albums opens. The image is automatically
saved to the selected album after capture. Change the
setting after you finish taking pictures for the selected
album.
Show captured image—Select
captured image after it is taken, or
continue taking pictures right away.
Extended zoom (main camera only)—Select
(continuous) to allow the zoom increments to be smooth
and continuous between digital and extended digital
zoom or On (paused)
pause at the digital and extended digital step point. If you
want to limit the zoom to where the selected image
quality is maintained, select Off.
Flicker cancellation—Select
Shutter tone—Select the tone you want to hear when you
take a picture.
Memory in use—Select where to store your images.
28 Copyright © 2007 Nokia. All rights reserved.
Large, Print 2M - Med., or
Small. To send the image through
0.3M.
Yes if you want to see the
No if you want to
On
to allow the zoom increments to
50Hz or 60Hz.

Take pictures in a sequence

Sequence mode is available only in the main camera.
To set the camera to take up to six pictures in a sequence
(if enough memory available), select
mode.
To take the pictures, press the capture key.
After you take the pictures, they are shown in a grid on the
display. To view a picture, press
You can also use the sequence mode with the self-timer.
To return to the sequence mode viewfinder, press the
capture key.
You in the picture—self-timer
The self-timer is available only in the main camera.
Use the self-timer to delay the capture so that you can
include yourself in the picture. To set the self-timer delay,
select Options > Self timer
20 seconds. To activate the self-timer, select Activate. The
self-timer indicator ( ) blinks and the device beeps when
the timer is running. The camera takes the picture after the
selected delay elapses.
You can also use the self-timer in the sequence mode.
Options > Sequence
to open it.
> 2 seconds, 10 seconds, or