Speed Dial A Phone Number; Voice Dialing - Nokia N Series User Manual

Your device supports conference calls between a
maximum of six participants, including yourself.
To have a private conversation with one of the
participants, select
Select a participant, and select Private. The
conference call is put on hold on your device. The other
participants can still continue the conference call.
When you finish the private conversation, select
Options > Add to conference
conference call.
To drop a participant, select
Drop participant, scroll to the participant, and select
Drop.
4 To end the active conference call, press

Speed dial a phone number

To activate speed dialing, press
Settings > Call > Speed dialling
To assign a phone number to one of the speed dialing keys
( — ), press
to the key to which you want to assign the phone number,
and select Options
mailbox.
To call in the standby mode, press the speed dial key and
.
60 Copyright © 2007 Nokia. All rights reserved.
Options > Conference
to return to the
Options > Conference
, and select
> On.
, and select Tools > Spd. dial. Scroll
> Assign. is reserved for the voice

Voice dialing

Your device supports enhanced voice commands.
Enhanced voice commands are not dependent on the
> Private.
speaker's voice; you do not record voice tags in advance.
Instead, the device creates a voice tag for the entries in
contacts, and compares the spoken voice tag to it. The
voice recognition in the device adapts to the main user's
voice to recognize the voice commands better.
The voice tag for a contact is the name or nickname that is
>
saved on the contact card. To listen to the synthesized
voice tag, open a contact card, and select
voice tag.
.
Make a call with a voice tag
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should
Tools >
not rely solely upon voice dialing in all
circumstances.
When you use voice dialing, the loudspeaker is in use. Hold
the device at a short distance away when you say the voice
tag.
1
To start voice dialing, in the standby mode, press and
hold the right selection key. If you are using a
compatible headset with the headset key, press and
hold the headset key to start voice dialing.
Options > Play