Take Pictures In A Sequence; You In The Picture - Self-Timer - Nokia N95 User Manual

Hide thumbs Also See for N95:
Table of Contents

Advertisement

When you take pictures, the default scene is Auto. You can
select the
User defined
To make your own scene suitable for a certain
environment, scroll to
Change. In the user defined scene you can adjust different
lighting and color settings. To copy the settings of another
scene, select
Based on scene mode

Take pictures in a sequence

The sequence mode is available only in the main camera.
To set the camera to take six pictures or more in a
sequence (if enough memory available), in the active
toolbar, select
Switch to sequence mode
six pictures, or the time period for taking pictures. The
number of pictures taken depends on the available
memory.
To take six pictures, press the capture key. To stop taking
pictures, press Cancel. To take more than six pictures, press
and hold the capture key. To stop taking pictures, release
the capture key. You can capture up to 100 images,
depending on the available memory.
To use a time period for taking pictures, select
sequence
mode, and a time preriod. To start taking
pictures, press the capture key. To stop taking pictures
before the time ends, press the capture key again.
40
Copyright © 2007 Nokia. All rights reserved.
scene as the default scene.
User
defined, and select
Options
and the desired scene.
>
Burst
Switch to
After you take the pictures, they are shown in a grid on the
display. To view a picture, press
a time period for taking pictures, the last taken picture is
shown on the display. To view other pictures, press
>
You can also use the sequence mode with the self-timer.
When using the self-timer, the maximum amount of
pictures is six pictures.
To return to the sequence mode viewfinder, press the
capture key.
You in the picture — self-timer
The self-timer is available only in the main camera.
to take
Use the self-timer to delay the capture so that you can
include yourself in the picture. To set the self-timer delay,
in the active toolbar, select
seconds, or
20
seconds. To activate the self-timer, select
Activate. The self-timer indicator (
device beeps when the timer is running. The camera takes
the picture after the selected delay elapses.
To switch off
Self
timer
> Off.
Tip! In the active toolbar, select
seconds
to keep your hand steady when taking a
picture.
to open it. If you used
Self timer
>
2
seconds,
) blinks and the
timer, in the active toolbar, select
Self timer
.
10
Self
>
2

Advertisement

Table of Contents
loading

Table of Contents