2. DESCRIPTION
2.1. Technical Specifications
Folded and welded AISI 304 stainless steel sheet housing.
Internal frame protected with epoxy coating.
Passage obstacle in clear toughened glass, thickness: 10 mm.
Electrical supply: single phase, 230 VAC, 50 Hz (
impedance earthed industrial distribution network )
Consumption:
Automatic obstacle unlocking on power failure.
Variable speed controller ensures rapid obstacle movements at the start of movement and
deceleration at end of movement.
Obstacle position determined by position encoder.
Operating temperature: -20(*) to +50°C (*Thanks to the heat generated by the powered
internal equipment).
RH < 95%, without condensation.
Minimum opening time of the obstacles (adjustable): 2.5 seconds.
Net weight (kg):
Column
Panels
Total
MCBF (Mean Cycles Between Failures), when respecting recommended maintenance:
1,000,000 cycles
IP 43
EC compliant.
DAS Certified (Powered Security Device) in accordance with Fire Safety NF S 61 -937
standard
Gates and turnstiles control pedestrian access in both directions.
By definition, Direction A is the direction in which the controls are located on the right of the
user (=> obstacle opening in the clockwise direction).
The informat ion conta ined in th is docu ment is the property of Automat ic Syst ems and is conf ident ial. The recip ient is forb idd en to use it for any purpose ot her
than for the use of the products or the exe cut ion of the project to wh ich th ey refer or to communicate it to th ird parties without the pr ior wr itten conse nt of
Automat ic Systems. Document sub ject to change without advance not if icat ion .
SL93x + PPV323 + TBV327-MT-EN
.
0.12 A in closed and locked position,
0.50 A when turning,
0.90 A while locking.
PPV323
SL930
SL930
1 m
1.2 m
62
62
62
17
19
24
79
81
86
not to be connected to a floating network or to high
SL931
SL931
SL931
1.4 m
1.7 m
1.9 m
77
77
77
29
36
40
106
113
117
Direction A = clockwise
SL932
TBV327
0.9m
62
77
17
3 x 8.4
79
102
p. 5/40
Need help?
Do you have a question about the SL930 and is the answer not in the manual?