Equipment Disposal - VWR Homogeniser User Manual

Equipment Disposal

This equipment is marked with the crossed out wheeled
bin symbol to indicate that this equipment must not
be disposed of with unsorted waste. Instead it is your
responsibility to correctly dispose of your equipment
at life cycle - end by handing it over to an authorized
facility for separate collection and recycling. It is also
your responsibility to decontaminate the equipment
in case of biological, chemical and/or radiological
contamination, so as to protect from health hazards
the persons involved in the disposal and recycling of
the equipment. For more information about where you can drop off your waste of
equipment, please contact your local dealer from whom you originally purchased
this equipment. By doing so, you will help to conserve natural and environmental
resources and you will ensure that your equipment is recycled in a manner that
protects human health.
Table of Contents
4 Unpacking
5 Overview
6 General Operation
7 Loading Sample Tubes
8 Changing the Tube Holder
Changing the Neck Gasket
9
Troubleshooting
10
Transporting the Mini Bead Mill
Thank you.