Kärcher CV 66/2 Manual page 10

Device elements
1 Pushing handle, adjustable
2 Cable clamp
3 Cable holder, rotating
4 Storage compartment
5 Lock of pushing handle
6 Lid of filter chamber
7 Suction hose connection (for optional
suction set)
8 Fuse for brush drive
9 Fuse for suction turbine
10 Display 'Filter bag is full'
11 Power switch
A Appliance switch in OFF position
B Appliance switch in ON position
Colour coding
The operating elements for the cleaning
–
process are yellow.
The controls for the maintenance and
–
service are light gray.
10
All manuals and user guides at all-guides.com
 Open lid of filter chamber.
 Slide the filter bag into the basket with
 Push the opening of the filter bag over
 Close the lid of filter chamber.
 Wrap the mains cable of the appliance
 Remove the entire mains cable by turn-
 Swivel the pushing handle lock to the
– 2
EN
Start up
Inserting a filter bag
the opening facing the connecting hub.
the connection nozzle.
Operation
Storing and removing the cable
around the three cable holders.
ing the rotating cable holder.
Adjust the pushing handle
outside, set the desired pushing handle
height and close the lock.